Easy Way to Perform T Test in R

What is one-sample t-test?
Research questions and statistical hypotheses
Formula of one-sample t-test
Visualize your data and compute one-sample t-test in R
- Install ggpubr R package for data visualization
- R function to compute one-sample t-test
- Import your data into R
- Check your data
- Visualize your data using box plots
- Preleminary test to check one-sample t-test assumptions
- Compute one-sample t-test
- Interpretation of the result
- Access to the values returned by t.test() function
Online one-sample t-test calculator
See also
Infos

What is one-sample t-test?

one-sample t-test is used to compare the mean of one sample to a known standard (or theoretical/hypothetical) mean (\(\mu\)).

Generally, the theoretical mean comes from:

a previous experiment. For example, compare whether the mean weight of mice differs from 200 mg, a value determined in a previous study.
or from an experiment where you have control and treatment conditions. If you express your data as "percent of control", you can test whether the average value of treatment condition differs significantly from 100.

Note that, one-sample t-test can be used only, when the data are normally distributed . This can be checked using Shapiro-Wilk test .

One Sample t-test

Research questions and statistical hypotheses

Typical research questions are:

whether the mean (\(m\)) of the sample is equal to the theoretical mean (\(\mu\))?
whether the mean (\(m\)) of the sample is less than the theoretical mean (\(\mu\))?
whether the mean (\(m\)) of the sample is greater than the theoretical mean (\(\mu\))?

In statistics, we can define the corresponding null hypothesis (\(H_0\)) as follow:

\(H_0: m = \mu\)
\(H_0: m \leq \mu\)
\(H_0: m \geq \mu\)

The corresponding alternative hypotheses (\(H_a\)) are as follow:

\(H_a: m \ne \mu\) (different)
\(H_a: m > \mu\) (greater)
\(H_a: m < \mu\) (less)

Note that:

Hypotheses 1) are called two-tailed tests
Hypotheses 2) and 3) are called one-tailed tests

Formula of one-sample t-test

The t-statistic can be calculated as follow:

\[ t = \frac{m-\mu}{s/\sqrt{n}} \]

where,

m is the sample mean
n is the sample size
s is the sample standard deviation with \(n-1\) degrees of freedom
\(\mu\) is the theoretical value

We can compute the p-value corresponding to the absolute value of the t-test statistics (|t|) for the degrees of freedom (df): \(df = n - 1\).

How to interpret the results?

If the p-value is inferior or equal to the significance level 0.05, we can reject the null hypothesis and accept the alternative hypothesis. In other words, we conclude that the sample mean is significantly different from the theoretical mean.

Visualize your data and compute one-sample t-test in R

Install ggpubr R package for data visualization

You can draw R base graps as described at this link: R base graphs. Here, we'll use the ggpubr R package for an easy ggplot2-based data visualization

Install the latest version from GitHub as follow (recommended):

                # Install if(!require(devtools)) install.packages("devtools") devtools::install_github("kassambara/ggpubr")

Or, install from CRAN as follow:

                install.packages("ggpubr")

R function to compute one-sample t-test

To perform one-sample t-test, the R function t.test() can be used as follow:

                t.test(x, mu = 0, alternative = "two.sided")

x: a numeric vector containing your data values
mu: the theoretical mean. Default is 0 but you can change it.
alternative: the alternative hypothesis. Allowed value is one of "two.sided" (default), "greater" or "less".

Import your data into R

Prepare your data as specified here: Best practices for preparing your data set for R
Save your data in an external .txt tab or .csv files
Import your data into R as follow:

                # If .txt tab file, use this my_data <- read.delim(file.choose()) # Or, if .csv file, use this my_data <- read.csv(file.choose())

Here, we'll use an example data set containing the weight of 10 mice.

We want to know, if the average weight of the mice differs from 25g?

                set.seed(1234) my_data <- data.frame(   name = paste0(rep("M_", 10), 1:10),   weight = round(rnorm(10, 20, 2), 1) )

Check your data

                # Print the first 10 rows of the data head(my_data, 10)

                                  name weight 1   M_1   17.6 2   M_2   20.6 3   M_3   22.2 4   M_4   15.3 5   M_5   20.9 6   M_6   21.0 7   M_7   18.9 8   M_8   18.9 9   M_9   18.9 10 M_10   18.2

                # Statistical summaries of weight summary(my_data$weight)

                                  Min. 1st Qu.  Median    Mean 3rd Qu.    Max.    15.30   18.38   18.90   19.25   20.82   22.20

Min.: the minimum value
1st Qu.: The first quartile. 25% of values are lower than this.
Median: the median value. Half the values are lower; half are higher.
3rd Qu.: the third quartile. 75% of values are higher than this.
Max.: the maximum value

Visualize your data using box plots

                library(ggpubr) ggboxplot(my_data$weight,            ylab = "Weight (g)", xlab = FALSE,           ggtheme = theme_minimal())

One-Sample Student's T-test in R

Preleminary test to check one-sample t-test assumptions

Is this a large sample? - No, because n < 30.
Since the sample size is not large enough (less than 30, central limit theorem), we need to check whether the data follow a normal distribution.

How to check the normality?

Read this article: Normality Test in R.

Briefly, it's possible to use the Shapiro-Wilk normality test and to look at the normality plot.

Shapiro-Wilk test:
- Null hypothesis: the data are normally distributed
- Alternative hypothesis: the data are not normally distributed

                shapiro.test(my_data$weight) # => p-value = 0.6993

From the output, the p-value is greater than the significance level 0.05 implying that the distribution of the data are not significantly different from normal distribtion. In other words, we can assume the normality.

Visual inspection of the data normality using Q-Q plots (quantile-quantile plots). Q-Q plot draws the correlation between a given sample and the normal distribution.

                library("ggpubr") ggqqplot(my_data$weight, ylab = "Men's weight",          ggtheme = theme_minimal())

One-Sample Student's T-test in R

From the normality plots, we conclude that the data may come from normal distributions.

Note that, if the data are not normally distributed, it's recommended to use the non parametric one-sample Wilcoxon rank test.

Compute one-sample t-test

We want to know, if the average weight of the mice differs from 25g (two-tailed test)?

                # One-sample t-test res <- t.test(my_data$weight, mu = 25) # Printing the results res

                                  One Sample t-test data:  my_data$weight t = -9.0783, df = 9, p-value = 7.953e-06 alternative hypothesis: true mean is not equal to 25 95 percent confidence interval:  17.8172 20.6828 sample estimates: mean of x      19.25

In the result above :

t is the t-test statistic value (t = -9.078),
df is the degrees of freedom (df= 9),
p-value is the significance level of the t-test (p-value = 7.95310^{-6}).
conf.int is the confidence interval of the mean at 95% (conf.int = [17.8172, 20.6828]);
sample estimates is he mean value of the sample (mean = 19.25).

Note that:

if you want to test whether the mean weight of mice is less than 25g (one-tailed test), type this:

                  t.test(my_data$weight, mu = 25,               alternative = "less")

Or, if you want to test whether the mean weight of mice is greater than 25g (one-tailed test), type this:

                  t.test(my_data$weight, mu = 25,               alternative = "greater")

Interpretation of the result

The p-value of the test is 7.95310^{-6}, which is less than the significance level alpha = 0.05. We can conclude that the mean weight of the mice is significantly different from 25g with a p-value = 7.95310^{-6}.

Access to the values returned by t.test() function

The result of t.test() function is a list containing the following components:

statistic: the value of the t test statistics
parameter: the degrees of freedom for the t test statistics
p.value: the p-value for the test
conf.int: a confidence interval for the mean appropriate to the specified alternative hypothesis.
estimate: the means of the two groups being compared (in the case of independent t test) or difference in means (in the case of paired t test).

The format of the R code to use for getting these values is as follow:

                # printing the p-value res$p.value

                [1] 7.953383e-06

                # printing the mean res$estimate

                mean of x      19.25

                # printing the confidence interval res$conf.int

                [1] 17.8172 20.6828 attr(,"conf.level") [1] 0.95

Online one-sample t-test calculator

You can perform one-sample t-test, online, without any installation by clicking the following link:

Infos

This analysis has been performed using R software (ver. 3.2.4).

Enjoyed this article? I'd be very grateful if you'd help it spread by emailing it to a friend, or sharing it on Twitter, Facebook or Linked In.

Show me some love with the like buttons below... Thank you and please don't forget to share and comment below!!

Avez vous aimé cet article? Je vous serais très reconnaissant si vous aidiez à sa diffusion en l'envoyant par courriel à un ami ou en le partageant sur Twitter, Facebook ou Linked In.

Montrez-moi un peu d'amour avec les like ci-dessous ... Merci et n'oubliez pas, s'il vous plaît, de partager et de commenter ci-dessous!

Recommended for You!

Recommended for you

This section contains best data science and self-development resources to help you on your path.

Want to Learn More on R Programming and Data Science?

On Social Networks:

Get involved :
Click to follow us on Facebook and Google+ :
Comment this article by clicking on "Discussion" button (top-right position of this page)

mooreyoughlythers.blogspot.com

Source: http://www.sthda.com/english/wiki/one-sample-t-test-in-r